[TenTec] Triton IV SSB problem

[Paul - W8KC]

Could be carrier null setting on SSB, but more than likely is stray RF in
the shack caused by ground issues.  

Just as a side note, until you own or borrow a nice dummy load, you can not
claim that you do not have antenna or feedline issues. 

73! =paul= W8KC -- Collector of Ten*Tecs and other fine plastics.
Visit the Virtual Ten*Tec Museum at
http://mywebpages.comcast.net/w8kc/tentec.html
Listen to 7.040 MHz from anywhere with Media Player v10
http://www.w8kc.com/stream.htm


-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Kim Medley
Sent: Saturday, February 25, 2006 3:26 PM
To: tentec at contesting.com
Subject: [TenTec] Triton IV SSB problem

My Triton IV works fine on cw but has a problem on ssb. When the PTT is
closed the radio puts out about 10 watts of RF on 20 meters with no  audio
applied. In addition when transmitting in ssb the minimum audio  output is
about 25 watts with ALC and Drive turned fully CCW. My SWR is  1.4/1 so
there aren't any antenna problems. Any assistance is  appreciated.  Kim
AB7JK
  
		
---------------------------------
Yahoo! Mail
Bring photos to life! New PhotoMail  makes sharing a breeze. 
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec