[TenTec] Rephrasing the Big Question...

[Mike Hyder -N4NT-]

Worst case the 960's overcurrent protection trips.  Best case thereafter is 
to set it for the extra amp or two that's needed.  I'd bet that with the 
Omni V into a properly matched aerial the 960 won't trip at all, ever.

73, Mike N4NT

----- Original Message ----- 
From: "Darwin, Keith" <Keith.Darwin at goodrich.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Friday, January 06, 2006 12:48 PM
Subject: Re: [TenTec] Rephrasing the Big Question...


I'll take a guess and hope someone will be able to back it up.  I
believe the answer is yes with one possible restriction.  IF (big if
there) the 960 won't generate as much output as the 961, then you'd have
to reduce power output on the Omni to not over-current the PS.

My Omni V runs on a 961 PS.

- Keith KD1E -

-----Original Message-----
From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com] On Behalf Of louis garrison
Sent: Friday, January 06, 2006 12:35 PM
To: tentec at contesting.com
Subject: [TenTec] Rephrasing the Big Question...

Can the 960 power supply be safely used with the Omni V transceiver? YES
or NO