[TenTec] RTTY on the Omni VI

[Mike]

It is, of course, possible to drive the rig on digital modes without any 
attenuation into the line in or mic socket.  It is my experience that many 
new ops do not appreciate the -28db IMD level required by PSK31, recommended 
by Peter G3PLX, to ensure a clean splatter free transmission.  This is why I 
suggested in an earlier mail that it pays to keep an eye on the input 
levels.  Relying on the soundcard settings alone makes adjustments more 
difficult but obviously not impossible.

Will close on this one.

73 de Mike  GU3WHN, Ex 9V1OB, DA2XS


----- Original Message ----- 
From: "jack" <jfriend31 at comcast.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Sunday, January 15, 2006 8:48 PM
Subject: Re: [TenTec] RTTY on the Omni VI


> very well said, Bob.
>
> i have the Orion and have it directly connected to my computer and sound
> card. it works fantastically with MixW and LOGic7. no needed interfaces of
> any kind for digital modes including CW.
>
> jack ak7o
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>