[TenTec] Pegasus xmit problem

[John Huffman]

Dave or anyone else with Pegasus schematics -

Is it possible to email a scan or .jpg of the schematics?  I'd like to post them 
on the web to be accessible to all users/owners.

73 de NA8M
John



----- Original Message ----- 
From: "David McClafferty" <ve1adh at yahoo.ca>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Friday, January 27, 2006 11:34 AM
Subject: Re: [TenTec] Pegasus xmit problem


> When I had my problem, I called TT and they sent me
> schematics.
>
> 73, Dave, VE1ADH
>
> --- Rich McCabe <r.mccabe at 1967z28.com> wrote:
>
>> I am guessing there is no schematics available??
>>
>>
>> Thanks and 73,
>>
>> Rich
>>
>> kd0zv
>>
>>
>> ----- Original Message ----- 
>> From: "David McClafferty" <ve1adh at yahoo.ca>
>> To: "Discussion of Ten-Tec Equipment"
>> <tentec at contesting.com>
>> Sent: Thursday, January 26, 2006 9:04 PM
>> Subject: Re: [TenTec] Pegasus xmit problem
>>
>>
>> > Check the pin diodes that switch the RECEIVE
>> bandpass
>> > filters. If any are shorted the filter will be in
>> the
>> > circuit on transmit and can cause a fault like
>> this.
>> >
>> > 73 and good luck, Dave, VE1ADH
>> >
>> > --- Rich McCabe <r.mccabe at 1967z28.com> wrote:
>> >
>> >> I have a Pegasus that has been sitting in storage
>> >> for awhile. I am just
>> >> pulling it out and getting it back online.
>> >>
>> >> When I put it away I removed the factory internal
>> >> tuner. I am pretty sure I
>> >> checked it afterwards but its been long enough I
>> >> cant remember for sure.
>> >>
>> >> Anyway, it transmits about 75 watts on 15 and 20
>> >> meters but has no power on
>> >> any other bands. It acts like it is transmitting
>> but
>> >> has no power out. As a
>> >> matter of fact,  it is drawing HIGH current on
>> the
>> >> other bands when
>> >> transmitting. I think on 15 and 20 it is draws
>> about
>> >> 12 amps (crude estimate
>> >> based on astron meter) and on other bands that
>> have
>> >> no power out it is
>> >> drawing anywhere from 15 to 30 amps.
>> >>
>> >> Just getting ready to tear into it. Any
>> suggestions?
>> >>
>> >> Rich
>> >> kd0zv
>> >>
>> >> _______________________________________________
>> >> TenTec mailing list
>> >> TenTec at contesting.com
>> >>
>> http://lists.contesting.com/mailman/listinfo/tentec
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
> __________________________________________________________
>>
>> > Find your next car at http://autos.yahoo.ca
>> > _______________________________________________
>> > TenTec mailing list
>> > TenTec at contesting.com
>> >
>> http://lists.contesting.com/mailman/listinfo/tentec
>> >
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>
>
>
>
>
>
>
> __________________________________________________________
> Find your next car at http://autos.yahoo.ca
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>