[TenTec] Paragon memory loss
C. Mark Cring
n8coo at yahoo.com
Fri Jul 14 12:31:09 EDT 2006
I also use a NiMH, obtained from Radio Shack, with
good results. I replace mine about every 3 years. I
have had the power supply off for up to a few weeks
without losing the memories. DO NOT ever use an
alkaline in a Paragon unless the resistor is removed
that supplies charging current to the battery! The
alkaline will overheat and leak and cause you a lot of
grief. The manual is wrong and Ten Tec has never
changed it to my knowledge.
I suspect the charging current is very low and may
take more than a day to charge to full capacity.
73, Mark N8COO
> > From: w8au at sssnet.com
> Subject: Re: [TenTec] Paragon memory loss ...
> Date: Wed, 12 Jul 2006 23:04:43 -0400
> To: <tentec at contesting.com>
>
> At 09:23 AM 7/12/06, William Lee wrote:
> >The manual says either nicad or alkaline can be
> used.
>
> I've used NiMH 9V batts with good results.
> Theoretically longer service...
>
> w8au
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the TenTec
mailing list