[TenTec] Need Help On Omni VI+ Rcvr Audio Mod

[W5vhp at aol.com]

Peter,
 
I had the same questions and sent an e-mail to George at  Inrad.  This is his 
response:  "The factory installed caps are much  too big. (meaning in 
capacitance).  That is why the audio response is so  limited.  Since the two caps in 
series are 10 times the value of the new  cap from Inrad, you need only remove 
one.  The one that is left in the  circuit has little effect on the new cap."
 
I haven't performed the mod, yet.  When I do, I will remove  the smt cap and 
replace it with the leaded cap. that was included in the  kit.
 
Good luck!
 
Larry       W5VHP