[TenTec] Omni 6+ on it's way

wo8l at aol.com wo8l at aol.com
Sat Jun 10 21:51:28 EDT 2006


I have both an OMNI VI Plus and a Kenwood 570.
 
When it comes to adjacent signals, forget it.  The 570 is far inferior to the Ten Tec.
 
When it comes to separating close signals, the OMNI is totally better.
 
The Kenwood employs filtering mostly at the AF level, not the IF.  In addition, the receiver isn't as good to begin with.  The Kenwood has a very noisy receiver due to the IF conversion frequencies used to enable the general coverage capability.  Lots of static on the Kenwood.
 
Actually, for everything that's been said and studied, I'll take my Alinco DX 70 receiver over the 570 when it comes to noise.  The filtering is superior on the 570 when compared to the Alinco, which has no filtering to speak of, but the Alinco is my choice when it comes to noise.  My 570...and everyone I've ever heard...is a popcorn machine.  
 
The 570 is noisy and the DSP on SSB in the 570 sounds like Donald Duck.
 
I have a love/hate relationship with my Kenwood.  It's convenient when the bands are hot.  But the OMNI is waaaay superior in separating signals.  It's a no brainer.
 
73s,
 
Rick
WO8L
 
-----Original Message-----
From: Ken Brown <ken.d.brown at hawaiiantel.net>
To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Sent: Fri, 9 Jun 2006 18:40:52 -1000
Subject: Re: [TenTec] Omni 6+ on it's way


The reason I got started with Ten-Tec is that I had trouble with close 
(in frequency) strong signals while operating in 160 meter contests 
using a Kenwood TS-440. I did some studying about receivers and decided 
an Omni VI would be the way to go. I was not disappointed.

I have never operated a Kenwood TS-570. It may be an slight improvement 
over the TS-440, yet I believe it is not very much different. Does your 
TS-570 recommending friend have one? Perhaps when you have your Omni VI, 
you could invite him to bring his rig over, and do some receiver 
comparisons during the next contest. I'm sure you'll conclude that 
buying the Omni VI was the right decision.

DE N6KB


> I you like phase noise, 
> agc pumping when a signal gets close, the 570 is great
>> bought an Omni 6+ 
one friend tell me I should get rid of it
>>  I feel a little demoralized.
>>  

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
________________________________________________________________________
Check out AOL.com today. Breaking news, video search, pictures, email and IM. All on demand. Always Free.


More information about the TenTec mailing list