[TenTec] (no subject)

[jfriend31 at comcast.net]

Keith, i have been using LOGic8 with my Orions since Dennis made it available. i am convinced the problem with lag is due to serial ports. LOGic8 reads both radios well but with both turned on the delay is untolerable. if i turn one of the radios off LOGic8 speeds up to almost right on the money. however i must click on the Freq window in LOGic8 to have the exact frequency entered properly. 

i also use MixW with LOGic8. MixW reports the frequency to LOGic8. i can find NO way to turn that part of MixW off. 

if you find a solution to your challenges please let me know. i am going to try using a USB to Serial adapter and see if that works and eliminates the lag.

jack ak7o

-------------- Original message -------------- 
From: ac9s at mchsi.com 

> I received my new Orion II three days ago - it has been a blast so far, but I 
> have one question. I am using Logic 7 for logging and have a problem with it 
> reading band / mode data when I log a qso. Logic includes a primitive rig 
> control window and that displays the Orion's frequency, mode, etc just fine 
> and I can control the Orion from Logic without problem. I do note that the 
> frequency display in Logic lags the Orion by a little. Logic does just fine 
> with the Pro that I previously used and I am using the same serial card. Any 
> thoughts? 
> 
> Thanks -- 
> 
> Keith - AC9S 
> _______________________________________________ 
> TenTec mailing list 
> TenTec at contesting.com 
> http://lists.contesting.com/mailman/listinfo/tentec