[TenTec] Using Airpax breaker

Ken Brown ken.d.brown at hawaiiantel.net
Sun Jun 18 15:08:19 EDT 2006


Specifications for both fuses and circuit breakers are probably 
available, which would include the amount of time that it take to 
transition from closed to open after an over current condition begins. 
When I think about the mechanics of a circuit breaker versus a fuse, and 
the amount of mass which has to move in order for the path to open in a 
circuit breaker versus a fuse, I find it easier to believe that the fuse 
is faster. Some very smart engineers have put a lot of effort into 
designing both fuses and circuit breakers, and it may be the results of 
their efforts contradict my intuitive sense that a fuse opens faster. 
Comparison of specification sheets ought to settle it.

Ken N6KB

Tommy wrote:
> Hi Art,
>
> I agree with you Art. It is true this should not become a 'fuss' 
> because Mike is correct and your statement is simply incorrect. End 
> of story. Period!
>
> Happy Fathers Day.....
>
> Tom - W4BQF
>
>
>
> At Sunday 09:56 AM 6/18/2006, you wrote:
>   
>> Sorry Mike you are very very wrong.  Fuses are always used when one
>> wants the best protection for solid state equipment or even in large
>> industrial applications for  motors etc they are mandatory.  But I don't
>> plan on getting into an on line fuss so this is my last email on the
>> subject.  If anyone is interested just do a google search.
>>
>> Best
>>
>> Art
>>
>>
>>
>>
>> Mike Hyder -N4NT- wrote:
>>     
>>> Because I believe that people have the right to be wrong, I normally
>>> wouldn't respond to this.  Art is 100% wrong.  I want nobody to lose a rig
>>> because of his advice.  The Air-Pax circuit breakers are much faster than
>>> fuses.  A fuse will not separate quick enough to reliably protect a rig.
>>>
>>> About how to connect them: I crimp the spade connectors to the wires and
>>> slide them onto the contacts of the Air-Pax.  I do not know the 
>>>       
>> best way but
>>     
>>> my way works find and runs no risk of heat damage to the breaker.
>>>
>>> 73, Mike N4NT
>>>
>>> ----- Original Message -----
>>> From: "Rideout Family" <wa6ipd at dslextreme.com>
>>> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
>>> Sent: Sunday, June 18, 2006 5:29 AM
>>> Subject: Re: [TenTec] Using Airpax breaker
>>>
>>>
>>>
>>>       
>>>> If you are looking for over current protection fuses are the way to go
>>>> they can clear in 1/2 cycle or less.  Circuit breakers are mechanical
>>>> devices with moving parts, and break the circuit too slowly.
>>>>
>>>> Art,
>>>> WA6IPD
>>>>
>>>>
>>>>
>>>> Kirk Braunius wrote:
>>>>
>>>>         
>>>>> How do some of you on the list mount Airpax breakers in a power line
>>>>> between
>>>>> p/s and radio?  I'm planning on putting mine in a small metal box.  Do
>>>>> you
>>>>> attach spade connectors to your power line and slip onto breaker, or
>>>>> solder
>>>>> directly to the breaker?  If soldering, what kind of mechanical
>>>>> connection
>>>>> do you start with?
>>>>>
>>>>> Thanks,
>>>>> Kirk
>>>>> AI4PZ
>>>>>
>>>>>           
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>>>
>>>
>>>       
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>     
>
> Tom
>
> "I couldn't repair your brakes, so I made your horn louder."
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>   



More information about the TenTec mailing list