[TenTec] observations of my Orion with V 1.372

Joseph Trombino Jr w2kj at bellsouth.net
Sun Mar 5 22:36:50 EST 2006


Been playing around with the tap settings on my Orion and note the 
following:

At 199 taps the DSP filters appear to be at their sharpest but the noise 
floor is substantially raised.....switching the NR in and out doesn't seem 
to have much effect.  I conducted the test on 40m

Using the tap setting at 32 substantially lowered the noise floor and made 
for much more pleasant listening.  Switching the NR in and out made a large 
difference in hearing the signal....the signal rose up out of the noise 
floor and copy was much better with the NR turned on (taps at 32).

Tried the new firmware but didn't like the way the S meter worked vis-a-vis 
the RF gain control.....V 1.327 is much better in that regard....at least to 
my operating preferences.

Just some observations....now to install the Inrad 600hz filter in place of 
the Ten Tec 500hz filter and see how that plays.

BTW:  I've had this Orion for over a year now and it is the best CW machine 
I have ever used (I had an OMNI VI/3 for nine years before getting the 
Orion).

                                    73, Joe W2KJ
                                    North Carolina 




More information about the TenTec mailing list