[TenTec] wanted rig blaster or other interface for digital modes

[jack]

Dave, if you wish to make your own try the following:

isolation transformer in series with a 50Kohm volume control. i used that 
system with an Icom 756 for years. the volume control is to set the gain. 
isolation transformers were from Radio Shack.

cheap! but no fancy circuits.

jack ak7o


----- Original Message ----- 
From: "dave dabay" <kd3pc at cox.net>
To: <tentec at contesting.com>
Sent: Friday, March 10, 2006 8:41 AM
Subject: [TenTec] wanted rig blaster or other interface for digital modes


>
>
> Guys and Gals
>
> Looking for a rigblaster, microham, or rascal type interface to give the
> digital modes a start.  I have an OMNI-VI, v.3 to use...
>
> Prefer used until I know this is a way I want to go.  Don't really need 
> the
> high end stuff at this time.
>
> Thanks for listening.  replies to kd3pc at arrl.net, as to not burden the
> list.
>
> dave
>
> dave dabay
> KD3PC
>
>
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.2.1/278 - Release Date: 3/9/2006
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>