[TenTec] Hello from an old newbie

[Rich McCabe]

Great radio with the right software. I have had two. Still have one.

Callsign Software and N4PY Software. Both great.

Make sure you take all the RF precautions because they have  good chance of 
that with serial cables, speaker cables to PC, etc.

You will like the receiver. I think they are very smooth and lack in 
harshness like many radios.

Dont take the cover off !  Unless you want to say *%$#@ where is the radio 
:)

73,
Rich

----- Original Message ----- 
From: "Craig Roberts" <crgrbrts at verizon.net>
To: <tentec at contesting.com>
Sent: Monday, March 13, 2006 10:19 PM
Subject: [TenTec] Hello from an old newbie


> Hiya fellas,
>
> I'm Craig Roberts, W3CRR, near Washington, DC.  I've been active ham -
> on and off, anyway - for over 35 years. My first "off-the-shelf" rig was
> a Ten Tec PM-2 followed fairly soon thereafter by an Argonaut 505.  A
> long series and Heathkits (I worked for the Heath Company in the '70's).
> exotic homebrew rigs and -- more recently -- boatanchor restorations
> followed.
>
> Lately, I've sold off all of my vintage gear, except for a couple of
> sentimental favorites, and have converted my amateur radio space into a
> combination voiceover/narration studio (for work) and ham shack (for
> fun).  I'm building a Class E AM transmitter, but have opted for a
> Pegasus to take care of sideband and CW duties..
>
> I should be taking delivery of my first Ten Tec rig in decades at the
> end of this week. I'm very excited about the prospect of integrating the
> Pegasus into my modernized shack and will  - no doubt -- be back shortly
> with questions and comments.  Right now, I'm just here to say hello. So
> -- hello!  (By the way, if there's anything I should know about the
> Pegasus up front, please let me know).
>
> 73,
>
> Craig
> W3CRR
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>