[TenTec] Rx-320 as beacon receiver?

[Darrel Emerson]

I use a RX320 to monitor the NCDXF beacons for most of the
time. I find BeaconSee to be the most convenient software
for this - it already knows how to control an RX320, and many
other rigs.  BeaconSee gives a very convenient waterfall-like
display simultaneously on all the NCDXF beacons on all or 
whichever of the 5 DX bands you want to monitor. I use an 
old 200 MHz computer, which also drives a Pegasus with 
N4PY software at the same time. It is very interesting to see 
which bands are open to which part of the world at different times.
The PC clock needs to be set accurately (a second or better), 
but there's plenty of software around that can take care of that.
  There is other software around that does the same thing,
but BeaconSee is my favorite.  
            73,
                   Darrel, aa7fv.

>Date: Sat, 18 Mar 2006 13:55:10 -0600
From: "Rich McCabe" <r.mccabe at 1967z28.com>
Subject: [TenTec] Rx-320 as beacon device?
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Message-ID: <002201c64ac5$ef8c4d40$aa00a8c0 at nw8000>
Content-Type: text/plain;       charset="iso-8859-1"

I have a RX-320 that has not been turned on if over a year. I was thinking
that it might be a nice receiver for some type of beacon device. Does
anyone know of software that will scan the band, listen to beacons and show
some type of propogation result using the 320?

I know MFJ had/has an all in one unit that would turn on lights on a world
map showing that the beacon is active. At least I think thats how it
worked. 

Trying to put something back in service :)

73,

Rich
kd0zv<