[TenTec] Orion Aux Audio output (explained)

[Larry Menzel]

CE....absolutely!  What a doofus. Buck's gotta stop somewhere, eh?

Or as we say in Minnesota....Uff Da.

I'd have loved to watch that happen!

Larry, N0XB



-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Mike Gorniak
Sent: Tuesday, March 28, 2006 12:08 PM
To: tentec at contesting.com
Subject: Re: [TenTec] Orion Aux Audio output (explained)

Larry, I agree with you in principle. However, I must add an anecdote that
illustrates the problem in the real world:

I once worked for a radio station that had a sound system that they used at
various remote broadcasts and other events that required a PA system. For
some reason, the Chief Engineer had chosen good old fashioned AC Plugs and
modified extension cords as the interconnects. 

The results were eminently predictable. The CE received a phone call from an
intern who was working an event. It seems that every one of the loudspeakers
had the same fault...he'd plug it in, briefly hear a very loud hum, and then
the speaker would belch black smoke. As I recall, he did that with 4 600
dollar loudspeakers before bothering to call anyone. 

Now, who is responsible? The CE or the intern? Or both?

73,

Mike
NM7X
 

------------------------------


Date: Tue, 28 Mar 2006 09:38:18 -0600
From: "Larry Menzel" <retire at means.net>
Subject: Re: [TenTec] Orion Aux Audio output (explained)
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>

Yes, I must admit to several "gozinta" errors while getting to know my 
Orions.  None fatal, however, thus far.

RANT ON:

But you know, as I look at my amplifiers, my oscilloscope, my audio gear, my

sig-gen, all have common ports for many functions, any one of which, 
misaligned, will yield faulty results.  Let's put any blame for mis-plugged 
plugs directly where it belongs: On the Operator!

Wouldn't it be nice, a kinda kindergarten thing, to have every port color 
coded, and different shaped so we can be protected from oursleves, huh? 
But, guys, were big boys and girls now, and we should be aware enough to 
make SURE the plug is in the right hole before proceeding.  A quick check, 
even if it's with a mirror if you can't get to the back of the rig, should 
be SOP when interconnecting devices.  Let's not blame the tools, eh?

This is a serious radio for serious applications and operators.  It's not a 
toy with non-functional or multipurpose plugs. WE get to decide what we want

the radio to do, and we have to be able to figure that out AND take 
responsibility for our own errors in judgement or execution.

No offense, guys, but we got what we paid for.  I love the phase, Bob, 
"performance outweighs warts" if you want to call them that.

RANT OFF:

Larry, N0XB

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.384 / Virus Database: 268.3.2/294 - Release Date: 3/27/2006