[TenTec] Orion II 2.033 AM Transmit Output

[Grant Youngman]

> But I hooked up the dummy load, 2 different power meters in 
> series on my Orion
> (original) with 2.056 software.
> AM mode.  My data is not the same as Grant showed (quoted 
> below my data).

There wasn't a 2.05x firmware release mirroring the changes in 2.033.
That's why it still works.  2.032 on the Orion II behaved just as you
described for 2.056.  It was broken by 2.033.

Grant/NQ5T