[TenTec] 937 PS troubleshooting

[Stuart Rohre]

The sagging power supply either does not have the inherent current ampacity 
needed by the Scout, (9 to 10 amps at 13.8 Volts DC) or the capacitors are 
going and do not have the microfarads to do the job anymore.

The Scout has to have a minimum of 11.5 VDC by my Scout testing, to avoid 
instability.  Anything less, and you are having the chirp problem if not 
others.   Try turning down the power control on the bottom of the Scout as a 
temporary fix, until you hit a power draw that does not decrease the voltage 
of the supply under load.

Stuart
K5KVH