[TenTec] Orion v2.056 PSK question

[Paul Gates, KD3JF]

Just for your info I work anything on PSK with 25 watts.
 
Paul, KD3JF
Glen Burnie, MD
FM19qd (Map Grid Square)



----- Original Message ----
From: jack <jfriend31 at comcast.net>
To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Sent: Sunday, May 7, 2006 10:27:51 PM
Subject: Re: [TenTec] Orion v2.056 PSK question


i found that 40 watts were all one needs to work most any station on PSK31. 
following the Orion manual works great most of the time. VOX trip level 
about 10%, Anti-Vox about 40%. hang about .4 sec. Aux Input Gain about 60. 
TX audio source AUX.
that is where my Orion is set for PSK31
jack ak7o

----- Original Message ----- 
From: "Gary Tuck" <gtuck at mac.com>
To: "Ten Tec Mailing List" <tentec at contesting.com>
Sent: Sunday, May 07, 2006 6:07 PM
Subject: [TenTec] Orion v2.056 PSK question


> Brand new (one day) to this mode--or in fact any digital mode but
> CW.  Using PSK31 Deluxe and a SignaLink SL-1+.  Am receiving signals
> fine it seems.  Have sound card output (HP laptop) at about 70%.  Aux
> Input Gain at 80 in SSB menu.  I'm really puzzled about the TX EQ
> setting though.  The Orion manual suggests a setting of -14db.  This
> setting alone changes the output more than anything else.  If I move
> it to a setting of "0"  power drops to 5w output.  (PWR is set at
> 100) As I adjust the setting to -14db, the power increases to 35w and
> will rise to 75w if I move it  further.  If I look at the manual,
> this seems rather counter intuitive.
>
> Thoughts or guidance pse??
>
> Gary W7TEA
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec