[TenTec] Omni VI computer interface question

[Vic Klein]

On my 585 Paragon with the RS-232 board the Rxdata and Txdata lines are
crossed from one end of the cable to the other. Mine was wired just like the
manual and works fine, but I think a standard null-modem adaptor with a
straight cable would work the same.

=Vic=
WA4THR

-------------------------------------------
To:  tentec at contesting.com
Subject:  [TenTec] Omni VI computer interface question
From:  john.brewer at us.schneider-electric.com
Reply-to:  Discussion of Ten-Tec Equipment <tentec at contesting.com>
Date:  Thu, 9 Nov 2006 15:35:57 -0500
List-post:  <mailto:tentec at contesting.com>

The info in the manual on how to interconnect the Omni VI is not clear to
me. Do I need to switch Rxdata and Txdata  on the cable used from the Omni
to the computer, or do I use a straight serial cable (Rxdata to Rxdata,
Txdata to Txdata)?

Trying to run Logger32 with the Omni and Paragon (it's already working with
my K2)

Thanks!
John K5MO