[TenTec] Omni VI computer interface question

[HUGHESRO]

John, I bought the TT model 305 level converter for $50 bucks on the big auction place on net. The cable goes from back of Omni 6, the 1/8 mini plug extreme right middle. Also RCA plug from 13.8 plug also on back, to power the converter. Then the converter has a DB24 serial to puter port. Works great. I use WIN-EQF logging and ham Radio Delux softeware. The latter is free. HRD has Psk also. But I do understand the DB25 on back can be used to computer. I have remote tuning knob, Model 301, into my DB25 on back. On page 3-11 of manual It says to use standard serial to connect to computer. Omni 5 has pins reversed. Hope I helped. Gud luck. Roger W4IV
---------- Original Message ----------------------------------
From: john.brewer at us.schneider-electric.com
Reply-To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Date:  Thu, 9 Nov 2006 15:35:57 -0500

>The info in the manual on how to interconnect the Omni VI is not clear to me. Do I need to
>switch Rxdata and Txdata  on the cable used from the Omni to the computer, or do I use a
>straight serial cable (Rxdata to Rxdata, Txdata to Txdata)?
>
>Trying to run Logger32 with the Omni and Paragon (it's already working with my K2)
>
>Thanks!
>John K5MO
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>