[TenTec] Century 21 Tuning Knob

Steve Sloane ssloane1 at rcn.com
Fri Sep 8 21:23:55 EDT 2006


This is probably completely wrong to anyone who has actually rebuilt a 
PTO...I have the rebuild kits but have never tackled the project but over 
the years, with having six of those pesky pto's under this roof, I have used 
Triflow, 3 in one oil, and the stuff in the blue can that is used for 
everything...name escapes me at this second...just a little, let it run down 
the shaft of the pto with the knob off....use gravity to  your advantage , 
walk away from it for a day or so and that has always made balky pto's work 
for me....for what it's worth....Steve, KU3S
----- Original Message ----- 
From: "jfelts" <jfelts at rap.midco.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Friday, September 08, 2006 6:26 PM
Subject: [TenTec] Century 21 Tuning Knob


> Got my C21 about an hour ago, its stuck on the low end of the dial, about
> 14017 on 20m.  It recieves, and it transmits.
>
> How the heck do you get the main tuning knob off? I've tried small screw
> drivers in case it uses set-screws. I've tried allen wrench and don't seek
> to hit the center. I think if I can get the knob off I can dribble some
> alcohol down the PTO shaft it will free.  It will move a tiny bit either
> way.
>
> Jerry - NR5A - South Dakota
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


More information about the TenTec mailing list