[TenTec] Sidetone Level with 2.037j

[Bob Cunnings]

No, the *relative* difference between "spot" tone level and keying
sidetone is what I've noticed has changed. For a given of sidetone
level setting, the "spot" tone is much louder than the keying sidetone
in this version, rather than being similar as before.

Yes, the keying sidetone level seems to be independent of audio gain
setting, whereas "spot" tone level seems to increase as audio gain
increases, but that doesn't work in my favor. With the new version I
can't get a high enough keying sidetone level (for my taste) while at
the same time having a "spot" level that isn't way too loud. The
problem is that the same control is used to set both levels. If the
"spot" tone level was made a separate adjustment, then I could get
what I want.

Bob NW8L

On 9/9/06, Kc9cdt at aol.com <Kc9cdt at aol.com> wrote:
> Hey guys...
> The impedance of the headphones effects the loudness.
> The O is specified at 16-32 ohms. Most folks are using much higher.
>
> TT probably setup the levels based on that impedance???
> Maybe this is effecting some of you?
>
> 73,
> Lee
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>