[TenTec] 2.059d: CW audio distortion in right headphone

[Ron Castro]

This may be the problem we are seeing in 2.037j with the new AGC scheme.  I 
found that using the slowest recovery times for each AGC setting and adding 
some 'hang' fixed it.  Try .21 s for slow, .17 for med and .04 for fast.

Ron N6AHA

----- Original Message ----- 
From: "Dick Green WC1M" <wc1m at msn.com>
To: "Ten Tec Reflector" <tentec at contesting.com>; "Orion Yahoo Group" 
<orion565 at yahoogroups.com>
Sent: Monday, September 11, 2006 12:20 PM
Subject: [TenTec] 2.059d: CW audio distortion in right headphone


> In 2.059d, there's a distinct clicking in the right headphone on received
> audio peaks in CW mode. This is true for both received signals and noise.
> The clicking is not present in the left headphone. It is not affected by 
> the
> AGC slope setting and is not present in V1.
>
> 73, Dick WC1M
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>