[TenTec] AM drive level 2.059D for Orion I

[Mark DeBord]

I noticed the drive level for AM has dropped. This causes my amp to only 
drive to about 50 watts on AM when I am used to driving it to 150 watts on 
AM.

I sent this into dits n bits.

I have read about the AGC setting suggestions, but I can never get rid of 
the RX digital artifacts/distortion 100% ; close, but there is still some 
evidence.

Maybe Ten Tec will come out with a follow-up update soon on the AGC 
correction since this seems to be a popular one; for both the Orion I and 
Orion II.

Mark KA4ICK