[TenTec] Identifying Filter Boards

[Clark Savage Turner]

You have the 4 pole SSB filter (that probably came from a Corsair) for 
the 9 MHz IF, I believe.  This is not the 217, 218 or 219 but was the 
main IF filter for some earlier radios.  It was a fine filter, but 4 
poles is less than 8 poles so a lot of fellows swapped them out :-)


On Sep 19, 2006, at 5:24 AM, JT Croteau wrote:

> I have either a 217, 218, or a 219 filter board but not seeing any
> markings on the filter to identify what exactly it is.  It has 4
> crystals and one crystal is marked with 8233.  The bottom of the board
> is stamped with 584L (this is most likely the part number for the
> board and common to most filters).

WA3JPG
Clark Savage Turner, J.D., Ph.D.
Professor of Computer Science
Cal Poly State University
San Luis Obispo, CA. 93407