[TenTec] OrionII & Heil Proset 5 audio problems

[Mike K9MI]

Hi Todd

I have had times over the years that I would RF my headphones. Bob is so 
generous with the length of the cables that some time they make great 
antennas. I use a snap on ferrite and it's big enough that you can get a lot 
of  the cable wound up and usually have plenty left. So far, knock on wood 
that has always helped me.

73, Mike K9MI


----- Original Message ----- 
From: "M. Todd Miskel" <kt0dd at bresnan.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Monday, April 02, 2007 18:13
Subject: [TenTec] OrionII & Heil Proset 5 audio problems


> Hello, I am getting AM broadcast audio into the MON audio with my new heil 
> proset 5. I checked the mic adapter wiring per the 02 manual and the 
> adapter is wired correctly with the separate grounds. The TX audio is 
> clean with no AM signals getting into it. I only hear it in the headphones 
> when using the MON to set my audio levels. Any clues as to a fix? 73.
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>