[TenTec] Airpax Polarity?

[K5XS at aol.com]

Hey Jim,
 
That's what I intend to do, but was wondering if someone could shed some  
light.  I have been on-line reading application notes.  No revelations  so far...
 
73,
Bernie
 
In a message dated 4/5/2007 5:18:34 P.M. Central Daylight Time,  
dufferjames at hotmail.com writes:

Hey  Bernie,

While it seems like there would be no polarity issues, why not  just connect 
the line side to line and the other side to load to prevent  any doudt.

Jim, wd4air


>From:  <K5XS at aol.com>
>To: <tentec at contesting.com>
>Sent:  Thursday, April 05, 2007 5:38 PM
>Subject: [TenTec] Airpax  Polarity?
>
>
> > At the minimal cost, I decided to add  an Airpax T11-1-20.0A-01-11C-V in 
>my
> > power supply circuit  for my Orion II.
> >
> > I got the breaker (I got three, if  anyone wants one at what I paid, let 
>me
> > know) today, and  looking at it, I see what appears to be an arrow
>indicating
>  > "In" and another indicating "Out."  I note also that the lug with a  #1 
>is
> > labeled "LINE," while the lug numbered #2 has no  other marking.
> >
> > Are these things polarized?   Does the "LINE" lug go to the +13.8VDC
>source
> > and the  non-LINE go to the positive terminal on the rig?
> >
> >  Thanks for any clues.
> >
> > Bernie  K5XS







************************************** See what's free at http://www.aol.com.