[TenTec] Omni VI Opt 1 or Omni VI + ?

[Don]

John,
I now have my OMNI VI opt 3. Got here real quick from Ten Tec.  
Everything seems to work perfect except one thing that has me puzzled.
There is a N.B. knob that does not seem to do anything.  I looked on the
reflector and found one person who also thought he had the problem and
some one suggested he get a hair dryer and make noise to check his noise
blanker.  So far I have not been able to make any noise to be able to
check it!  Since you have a OMNI VI plus, I was wondering if your
control did anything and what kind of noise should I expect to see
reduced? My DSP buttons LP and NR work about like I expected.  By the
way I have a Ten Tec Scout that I installed the Ten Tec noise blanker in
after I had it a while and it is really impressive. I sort of expected
that in the OMNI VI.
Any thoughts?
Thanks,
Don N4DJ 

-----Original Message-----
From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com] On Behalf Of John Cox
Sent: Monday, April 16, 2007 9:57 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Omni VI Opt 1 or Omni VI + ?

I have both an Omni VI opt 1 and an Omni VI Plus and neither manual has 
much to say. The plus manual says "You must verify the amplifier key
input 
requires only a low voltage dc connection to ground"  The Vi manual
doesn't 
even have this note.
I like my transceivers very much but Ten-Tec's manuals leave a lot to be

desired.
I would suggest calling Ten-Tec service.  They are very helpful.
When I get my shack finished I am going to run a Collins 30s-1 but will
be 
using a black box in between.
John Cox
Bona, Missouri


At 01:46 PM 4/16/2007, you wrote:

>I just bought that OMNI VI opt 3 from Ten Tec. I am now searching the 
>arcives for info on how much current the VOX relay can handle. I have a

>Drake L7 and the control circuit is 28 volts @ 50 ma.  As a CW operator

>that second filter position will soon be filled and used.
>The OMNI VI opt 3 is replacing a 1977 Drake C line as my main rig
however 
>the trusty Drake set will still be handy if needed!
>Don
>N4DJ
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.446 / Virus Database: 269.4.0/761 - Release Date:
4/14/2007 
>9:36 PM


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/761 - Release Date: 4/14/2007
9:36 PM


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec