[TenTec] New OII Firmware

[Ron Castro]

There are some early revision notes on the download website, but the full 
scoop is in a .doc file in the download called Orion History.doc.  Here is 
the section on the newest updates since 2.037j:

Version 2.038i

Changed Voice Record system. Monitor now OFF during record unless the user 
has MON turned on.

Added recall of preset antenna selection to the serial frequency set 
routine.

Modified AGC for AM RX because it was causing distortion.

Added on-screen SPLIT annunciator.

Added on-screen BAND REGISTER indicator (A,B,C,D)

Modified TGC for AM transmit to correct carrier level control.

Added FM mic limiter to prevent over-deviation.

Increased BW limit to 9khz for improved am rx

Added ULcc<cr> code to the serial command structure to control the line-out 
selection and level.

Added UL? Query to the serial command set,

Fixed the sub S-Meter display and SQL operation that caused meter to 
disappear.

Scaled FM and AM audio levels to get more output on speaker and rear panel 
outputs.



Version 2.038j

Corrected bug that caused VOX to turn off on a band change.



Version 2.038k

Correct bug that caused band register 'A' to be overwritten when any band 
change was made.



                     Ron  N6IE
                www.N6IE.com



----- Original Message ----- 
From: "George" <goofyham at highstream.net>
To: "Brad Johnson" <aa5ch at suddenlink.net>; "Discussion of Ten-Tec Equipment" 
<tentec at contesting.com>
Sent: Friday, April 27, 2007 4:53 AM
Subject: Re: [TenTec] New OII Firmware


> Where are the firmware revision notes for 2.038K?
> Thanks.
> George
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>