[TenTec] AL-811 amp integration with Omni V

[Rick, NJ0IP / DJ0IP]

Another possibility is that the Omni V is set up to key using the transistor
and the transistor might be blown (happens when you key an old amp with high
negative voltage keying).  If so, it's about a 10 cent repair.

Can't remember if the V has software enable/disable for the rig's Ext.
keying relay.  Maybe it's just switched off.  We need someone with a V
manual to look that up.

73
Rick

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of OTAKEBI at aol.com
Sent: Friday, August 03, 2007 7:30 PM
To: tentec at contesting.com
Subject: Re: [TenTec] AL-811 amp integration with Omni V

Mark, he tried that and says it does not key the amp.
I told Rick that the Relay(N O) RCA is the one I use.
He may have a bad RCA plug, phono cable, or someone without an amp  disabled

the relay because it made tooooo much noise.
Dan/N4VET



************************************** Get a sneak peek of the all-new AOL
at 
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec