[TenTec] Triton IV

[Donald Kemp]

Set the VFO to the low end near 0 and put the band switch in the 28
Mhz position. Turn the resonator counterclockwise as far as it will go
then touch up the receiver with the VFO. This is for 10 Mhz.
For 15 Mhz put the bandswitch in the 15 Mhz position and turn the
resonator counterclockwise. It will peak before it gets completly CCW.
Then tune it in with the VFO.

My 540 will not get 10 Mhz right on frequency but does a good job on 15 Mhz.

-- 
73,
Don, NN8B