[TenTec] Firmware update

[Grant Youngman]

> The current update is moving very slowly. It stayed on lines 
> 680, 710, and 720 for several minutes each. (I may not have 
> remembered the line numbers correctly.) The Orion display 
> says "Program Flash 668" when the PC display is much past 
> this number.  

There should be no long delays like you've described.

I'd do a master reset on the radio, check your RS-232 connection, and try it
again.  If that still doesn't help, try unchecking the "stop on errors" box
in the Setup menu on Update.

Grant/NQ5T