[TenTec] LDG tuner in O II?

[Ken Brown]

Sounds like a good method to me. I am curious about the LDG tuner. I 
presume the LDG has a built in frequency counter to address tuning 
memories for each frequency, or does it use a data connection from the 
transceiver to tell it what frequency to tune to when using memory 
tuning? In either case what is the frequency resolution? In other words, 
if you were to tune it at 3.505 kHz and then again at 3.506 kHz, would 
it actually store two separate tuning settings, or would the first one 
at 3.505 get overwritten because the two are the same frequency when 
described with a resolution of 10 kHz? Also, how many memories does it 
have? Is the frequency resolution the same for all bands? It would make 
sense to me to use smaller resolution on the lower bands. You might need 
five different tunings to cover 80/75 meters and only two each for 20 or 
15 meters.  If there is plenty of memory available it wouldn't matter.

DE N6KB
>  I did above initial tuning every 10 or 20 KHz across
>  each
> band.  
>
> Then in 'normal' radio use and when changing bands or moving across a
>  band,
> I 'tap' the Orion's Tune button. The LDG tuner quickly tunes (by
>  recalling
> the match parameters from its memory) to the predetermined setting near
>  or
> on that frequency in its memory.
>