[TenTec] Micro Keyer and Keying an Orion

[Larry Menzel]

Bill,

There's waaaaay too many parameters here to try to do it via email.

Give me a call, 952 212 2664, and we can do it on the phone.  I have an 
MK2R+ and it works marvelously. My office is here at my home, so I'm home 
most of the time, and I'll bein the shack after 2300z.

Larry, N0XB

----- Original Message ----- 
From: "Bill Gaines AD8P" <ad8p at wcoil.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Sunday, February 11, 2007 11:20 AM
Subject: [TenTec] Micro Keyer and Keying an Orion


>I bought a Micro Keyer last week to interface with my Orion. Well let me be 
>the first to say I am a total geek when it comes to computers and if it 
>isn't specifically spelled out for me in the instructions then I am going 
>to have issues. Well I have issues. I am certain that some of my esteemed 
>colleagues in radioville use the Micro Keyer and the Orion. Please let me 
>know how to contact you so I can copy your settings in the rig and in the 
>router so I can get it up and running.
>
> In setting up the router I can get it to sent "test" when I hit the test 
> button on the WinKey comport. I can also get it to key the rig from the CW 
> key port and the software also follows the rig on the control port. It 
> also sends tones from the FSK test button in router. However, I can't seem 
> to get any setting to work with N1MM logger. It will track in N1MM but it 
> won't key the rig.
>
> I was able to get MMTTY to run but I could be transmitting "upside-down" 
> as no-one would respond to me last night and I am sure it isn't signal 
> strength. I was able to make it generate tones however and key the rig but 
> as a standalone program....not in N1MM Logger.
>
> Come on guys.....any help is appreciated. This list has always come 
> through for me. I searched the archives and found nothing there by using 
> Micro Keyer Orion as my search criteria.
>
> Bill AD8P
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec