[TenTec] FWD: Orion Problem

[Carl Moreschi]

What firmware do you have loaded?  You may need to do a battery reset
followed by a main reset.

Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, North Carolina 28635

----- Original Message -----
From: "HUGHESRO" <ROGERH at realtracs.com>
To: <tentec at contesting.com>
Sent: Tuesday, January 09, 2007 10:07 PM
Subject: [TenTec] FWD: Orion Problem


>
> ---------- Original Message ----------------------------------
> From: "HUGHESRO" <ROGERH at realtracs.com>
> Reply-To: <ROGERH at realtracs.com>
> Date:  Tue,  9 Jan 2007 21:03:07 -0600
>
> I have the Orion, not the II. I got it used naturally about 2 weeks ago.
It has developed a strange problem. The signal just disappears and will key
but no output. It's like it lost the rx signals. I still have noise. It will
sometimes come back with off and on. Most of the time on the Main rx.
Sometimes on both. Any help I will be most greatful. I use CW 90% of the
time. Set UCW, BW 1000, PBT 0, 90 WATTS.  It has the internal tuner. I don't
have any optional filters engaged. I set to auto. Tnxs Roger W4IV  But I do
love this Big O.
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec