[TenTec] Omni VI Keyer Speed Control

[Dr. Gerald N. Johnson]

On Fri, 2007-01-12 at 14:32 -0500, John Huffman wrote:
> Don -
> 
> Further investigation shows that all three wires - brown, white, red - go to 
> connector D on the logic board.
> 
> I put a 4.7K resistor between the brown and purple wires.  It made no change in 
> the keyer speed.  The range remained 10-61 wpm.  Also tried it between the white 
> and the brown and between the white and the purple.  Again, no change.
> 
> Wonder what I'm missing?
> 
> A 10-turn pot may be too long for the space - about 1 1/8" behind the panel.
> 
> 73 de K1ESE
> John
> 
> 
Try a 10K in series with the purple wire.

73, Jerry, K0CQ