[TenTec] Gummy Feet

[n4dsp]

Guys,
here is the answer for those worn out and sticky feet. In fact they use this 
on the Schurr Profi II paddle. You can purchase it at Home Depot and the 
manufacturer is Shepherd and called Surface Guard. I bought the 1/2" size 
and they are clear. The package also says they are vinyl bumpers. You get 16 
pieces for just over a couple of dollars. I have put some on my equipment 3 
years ago and they have not softened and they are as adhesive today as when 
installed. Put these on a cw paddle and it will not move on the desk 
provided you don't have an usually heavy fist. Hope this helps some people.

john-n4dsp

----- Original Message ----- 
From: <Wj5mh at aol.com>
To: <tentec at contesting.com>
Sent: Sunday, January 14, 2007 11:45 AM
Subject: Re: [TenTec] Gummy Feet


>
> In a message dated 1/14/2007 8:28:10 AM Central Standard Time, 
> ny9h at arrl.net
> writes:
>
> The feet  had "melted" ( for
> lack of a better  word),,,,
>
>
>
>
> I've had trouble with small "stoppers" purchased at Home Depot.  I  used
> these for feet on home-brew equipment, and they reacted with the wood 
> furniture
> polish used on my shelves.  Really makes a mess.  Stick-on  feet from the 
> Shack
> seem OK, but I prefer the older screw on style from Antique  Electronic
> Supply.
>
> Joe
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>