[TenTec] 60 Meters

[Vic Klein]

Well, there ya' go! Looks like you're only listening for activity on one
actual 60M channel. Try retuning to the tuning frequencies Jim posted,
below, and give a listen. I just listened in on my Paragon and channels 1,
4, and 5 are busy with strong signals

=Vic=
WA4THR

> Subject:  Re: [TenTec] 60 Meters
> From:  "John" <brazos at rochester.rr.com>
> Reply-to:  Discussion of Ten-Tec Equipment <tentec at contesting.com>
> Date:  Sun, 1 Jul 2007 14:40:38 -0400
> List-post:  <mailto:tentec at contesting.com>
>
> My OII is set up with the first band staking register to  5.329.400  (b)
> 5.330.500 (c) 5.332.050 (d) 5.402.600 I am using a log periodic that I
also
> use for 75 mtrs and 40 mtrs the antenna worked when I used the jupiter
with
> it when 60 first came out .  I hear nothing now .  the log is up at 70
feet
> . Did a reset just to be sure and still nothing .    John kb2huk-----

>> Vic and the Group
>> I built up this little chart and it's hanging on my console.
>> Channels "4" and "5" are usually quite busy here in So. Md.  Talk to the
>> U.K a couple of weeks ago!!
>> -----------------------------------------------------------------------
>> Channel   Nominal      Tuning Frequency (carrier)
>>    1      5332kHz      5330.5kHz
>>    2      5348kHz      5346.5kHz
>>    3      5368kHz      5366.5kHz
>>    4      5373kHz      5371.5kHz
>>    5      5405kHz      5403.5kHz (common US/UK)
>>
>> 50 WATTS MAXIMUM RADIATED POWER
>> ALL FREQUENCIES ARE USB
>> ------------------------------------------------------------------------
>>
>> Jim/Ke3nK