[TenTec] Config help. Orion - Writelog - Windows XP

[John]

Thanks Larry, and Duane.

I'll configure it in the morning.  I will also try using my SignaLink USB 
interface to key the laptop keyboard and WL for CW exchanges.  I have it 
successfully working AFSK and PSK31 so far.

73 John K4NP
----- Original Message ----- 
From: "Duane Calvin" <ac5aa1 at gmail.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec at contesting.com>
Sent: Friday, July 20, 2007 8:50 PM
Subject: Re: [TenTec] Config help. Orion - Writelog - Windows XP


>I think he was looking for someone who is keying the Orion through the
> serial cable that connects a COM port directly to the rig.  I still don't
> know that this can be done, though someone posted that it can.  I key mine
> through a DigiKeyer off a USB port (virtual COM port) to the rear panel 
> key
> jack (or accessory plug key input - I forget which).  In case it's useful 
> at
> all, here are my WriteLog parms:
>
> Com1  TenTec Orion,  Baud:Auto, Poll: checked,  CommPTT: Yes
> Com2  n/a
> Com3  n/a
> Com4  n/a
>
> CW Keyer Type:  PC Generates
>
> The interface is via MicroHam DigiKeyer via their Eltima virtual ports
> (Com1-3, and 8 are virtual COM ports created by the driver software.)
>
> FWIW.
>
> 73, Duane
>
>
> Duane Calvin, AC5AA
> Austin, Texas
> www.ac5aa.com
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.5.472 / Virus Database: 269.10.4/898 - Release Date: 7/12/2007 
> 4:08 PM
>
>