[TenTec] Omni 7 remote over Internet working (tks KI4JPL)

[david feldman]

Hi John,

Success - I opened UDP 49154 and 49156 and receive audio is working fine.

FYI I'm using it over a Verizon EVDO cell phone Internet service (basically 
a cell phone linked via bluetooth to a laptop running the application.) It 
seems to run just fine in with that connection.

73 Dave WB0GAZ wb0gaz at hotmail.com

###

>Hi Dave,
>
>You have to enable 6 UDP ports starting with the base port you define.
>So if you pick 49152, then enable the range from 49152 through 49157.
>Commands are handled on the port you defined, 49152.
>RIP (Radio Over IP, receive audio from radio to PC) is then on 49154.
>TRIP (TRansmit over IP, transmit audio from the PC to the radio) is
>then on 49156.
>Odd ports don't handle RTP.
>
>Enjoy,
>73, de KI4JPL
>John Henry

_________________________________________________________________
Get a preview of Live Earth, the hottest event this summer - only on MSN 
http://liveearth.msn.com?source=msntaglineliveearthhm