[TenTec] Delta II problem

[James Boswell]

Barb,
     Try cycling the band switch back and forth thru
all positions. Don't spray tunner lub/cleaner on the
switch. So far I have fixed several tentec radios in
such a fachion. Remember the simple checks, is your
power supply voltage correct? A change in PS voltage
during transmit will cause major distortion in the
output signal.

     Hope this helps. Are you using an electronic
keyer? A leaky transistor in a electronic keyer can
also cause CW distortion.

     Take care, 73'S  KA5SIW


--- Barbara Maloney <ac5p at sbcglobal.net> wrote:

> Hello group,
>   Lately my Delta II has developed a distortion
> problem.  CW signals will break into severe
> distortion both receive and transmit.  SSB receive
> sigs do same.  I dont transmit SSB. AM receive
> signals will have severe noise on the audio.  
> Anybody have any clues or suggestions before I
> contact TT?
>    
>   Mike, AC5P  
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 



 
____________________________________________________________________________________
Never miss an email again!
Yahoo! Toolbar alerts you the instant new Mail arrives.
http://tools.search.yahoo.com/toolbar/features/mail/