[TenTec] Scout HISS-terectomy?

[dw]

This probably won't help much, but I have a motorcycle with built-in
cruze control.
They designed the control system so that the processor was located right
next to the stereo audio amp module.
Needless to say, with cruze on, there was a boat load of processor noise
injected into the audio.
When I had the system apart one day, I covered the processor section
with a thin metal plate.
Bingo.... noise gone.

May not help at all..... but then... one never knows :)
Duane


On Wed, 21 Mar 2007 18:03:39 -0400, "ron" <roncasa at verizon.net> said:
> well, the message you posted apparently said yes to your question.
> Also,
> Many years ago in QRP Quarterly there was a write up involving some 
> improvements to Scout when they first came out.
> This was one of them and yes, it did work
> Them Scouts are really nice radios to play with.
> And I like your subject title :-)
> 
> Ron, wb1hga
> "what me worry ..."
> 
> 
> ARDUJENSKI at aol.com wrote:
> > I had archived this note regarding the SCOUT background HISS remedy. I  
> > contacted TEN TEC this morning and was told there is no real "fix" for the  
> > processor hiss. Using high impedance headset helps some. I was curious if any  have 
> > made this mod and if it is effective.
> >  
> >   
>  
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
-- 
  dw
  dw at sover.net