[TenTec] OMNI VII ? Reset and Firmware download

[John Henry]

The manual is incorrect and needs updated.
Press the "0" digit to force yourself into flash update mode.
FYI:
MNU does force the master reset.
"1" forces you into radio mode.
"2" forces you into remote control mode.

73, d3 KI4JPL in TN
John

On 5/24/07, dbp at tds.net <dbp at tds.net> wrote:
> Hi-
>  OMNI VII
>  Upgrading software-
>  The manual says on page 33 to "Turn the transceiver while holding down the MNU  button"  in order to get into the "Flash Update Mode". ( bottom right column of page 33). In the top right hand column of the same page it gives the same instruction for a Master reset.
>  MNU works at power ON for a Master Reset. What key is pressed at on for Flash Update Mode?
>  73 de Dave in NH
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>