[TenTec] rtty

[Duane Calvin]

Ah, yes, and the Orion is upside down from what I think it should be.
Thanks - now I know what you're talking about.

	73, Duane

Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com  
 

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Bob McGraw - K4TAX
Sent: Wednesday, November 21, 2007 6:01 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] rtty

FSK TX Date can be selected as Mark High or Mark Low.  This MENU item then 
specifies the logic voltage of the command.

73
Bob, K4TAX


----- Original Message ----- 
From: "Duane Calvin" <ac5aa1 at gmail.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec at contesting.com>
Sent: Wednesday, November 21, 2007 5:11 PM
Subject: Re: [TenTec] rtty


> Dave,
> What "normal/reverse" are you describing?
>
> 73, Duane
>
>
> Duane Calvin, AC5AA
> Austin, Texas
> www.ac5aa.com
>
>
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of David W LeJeune, Sr
> Sent: Wednesday, November 21, 2007 4:37 PM
> To: 'Discussion of Ten-Tec Equipment'
> Subject: Re: [TenTec] rtty
>
> Hi, Folks
> I have had very good success running the Orion II on rtty.  I use a
> Rigblaster pro to key the FSK line and provide audio to the computer for
> MMTTY.  MMTTY with the EXTFSK 1.05 MMTTY plugin does a great job of
> providing FSK keying for the Orion II.  I use the FSK mode on the Orion II
> with bandwidth set to 750.  Only real problem is to remember whether to 
> set
> the normal/reverse to the right setting on the Orion II.
>
> Dave K5WNV
>
>
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of John
> Sent: Wednesday, November 21, 2007 12:31 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] rtty
>
> Good question Steve I am in the same boat as you are I have the Orion II 
> and
>
> would like to work rtty but have no success doing so .  John kb2huk
> ----- Original Message ----- 
> From: <W1dxh at aol.com>
> To: <tentec at contesting.com>
> Sent: Tuesday, November 20, 2007 9:40 PM
> Subject: [TenTec] rtty
>
>
>> what is the best way of using the orion for rtty? cabling soundcard 
>> etc.
>
>> i
>> have the  aea pk 232. should i use it or do something  different. any and
>> all
>> info appreciated, this will be a new mode for me.
>>
>> 73's tnx,
>> steve  w1dxh
>>
>>
>>
>> **************************************Check out AOL's list of 2007's
>> hottest
>> products.
>>
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec