[TenTec] Triton IV intermittant problem

[Louis Ciotti]

I am thinking that it is probably a bad solder joint on the board I can not get to easily (go figure).  The board I pulled out I did do a visual inspection of the solder joints, and they all looked OK, but that does not mean I did not miss anything.  When I get a chance to work on it again(probably Sunday) I will let you all know what I find.

Thanks again,

Lou
KC2RVD


-----Original Message-----
From: "Dr. Gerald N. Johnson" <geraldj at storm.weather.net>
Date: Thursday, Oct 18, 2007 1:17 pm
Subject: Re: [TenTec] Triton IV intermittant problem
To: tentec at contesting.com

Bad solder connection on that PC board. Could be totally missing solder.

73, Jerry, K0CQ