[TenTec] K4VUD & Titan 425

Jack kc3m at comcast.net
Thu Oct 25 19:41:22 EDT 2007


Had the same problem with my 425 three weeks ago.  One of the meter shunt
caps blew apart when I powered up the amp.  The sound scared our cat out of
the shack!

Easy fix.   Purchased replacements from Mouser with higher voltage ratings
and replaced all of them. 

Works fine.  Good luck & 73  Jack KC3M 

 

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Ron Notarius W3WN
Sent: Thursday, October 25, 2007 6:00 PM
To: Ron Castro; Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] K4VUD & Titan 425

Thanks Ron, your taking the time to do so is appreciated!  (Well, at least
by me)

73, ron w3wn

-----Original Message-----
From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]On Behalf Of Ron Castro
Sent: Wednesday, October 24, 2007 10:57 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] K4VUD & Titan 425


I've had the same problem with the capacitors on the meter shunt board.
I'll e-mail Charles.

         Ron N6IE
      www.N6IE.com


----- Original Message -----
From: "Ron Notarius W3WN" <wn3vaw at verizon.net>
To: "Ten-Tec Reflector" <tentec at contesting.com>
Sent: Wednesday, October 24, 2007 9:49 PM
Subject: [TenTec] K4VUD & Titan 425


> Charles K4VUD (who's apparently back in the US from Thailand right now) is
> having some problems with a blown mica disk capacitor on the meter shunt
> board.
>
> As far as I know, he is not a member of this reflector.
>
> Based on the rant that he just posted to multiple other reflectors
> (including one I administer, in violation of reflector rules... but that's
> another story) he is less than satisfied with the answer(s) he's gotten
> from
> Paul Clinton at the factory.  I am not going to repeat that rant here, as
> it
> is very one-sided.
>
> Regardless... if anyone who is a current or former owner of the amplifier
> wishes to contact Charles to see if they can render some assistance, you
> can
> contact him at k4vud at hotmail.com.  (Please do NOT reply to me at this
> email
> address!)
>
> Oh, and in case you are wondering... no, I am not at all happy with
> Charles
> right now (both as a Ten Tec owner and as the reflector admin) and have so
> informed him.  I am willing, though, to chalk this up as an unforseen
> side-effect of frustration.  So despite the chewing out that he (I think
> very unfairly) gave Paul, I'd rather see him get some help.
>
> (And if you've seen the rant on another reflector... well, I don't
> administer this one, so I can't tell you what to do -- nor do I wish to --
> but I would kindly suggest that due to some inflammatory comments within,
> it'd be best not to repeat it here.
>
> If you haven't seen it: Trust me.  You won't like it.)
>
> Thanks!
>
> 73, ron w3wn
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



More information about the TenTec mailing list