[TenTec] ARGO V Mobile Power Source

Bill Ames billa at aob.com
Thu Apr 10 12:32:56 EDT 2008


One time when I had a noise problem I used a pair of ferrite cores, one on
each leg of the DC power into the rig. These are the ones you can buy at
RatShack to clip around AC power cords. I wrapped as many turns of each lead
that would fit. These cores come in two pieces so this is easy to do. The
noise reduction was very good. 

Bill
KB1LG

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Jliving39 at aol.com
Sent: Thursday, April 10, 2008 12:08 PM
To: tentec at contesting.com
Subject: [TenTec] ARGO V Mobile Power Source

Folks,
     Anyone know of a commercial product that I can use  to power my ARGO V 
in my 2006 Explorer?  
 
     Previously ran Scouts and Argo in a 2000  Explorer with some noise but 
workable.  I can not lick the noise  problem in the 2006 Explorer and need
to 
be independent of the car's  battery.  
 
     Need to put out some counties.  Help!  
                                                                Thanks,
                                                             Jim,  K4CFA



**************Planning your summer road trip? Check out AOL Travel Guides.

 
(http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016)
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec




More information about the TenTec mailing list