[TenTec] Twinlead and Balanced Tuners

[VE1BN]

Jim -

Thanks for the very compressive "A Ham's Guide to RFI, Baluns, and Audio 
Interfacing, Rev 2."
I have been using 31 material snap-ons for a while to block RF on my 9913 
coax at the feedpoint of an OCF doublet.

Reading your experiences and explanations for such work confirms my findings 
using this particular mix. No RF has come down the line. (hi).

73,

Don, ve1bn at eastlink.ca






----- Original Message ----- 
From: "Jim Brown K9YC" <k9yc at audiosystemsgroup.com>
To: "David W LeJeune, Sr" <lejeuned at centurytel.net>; "Discussion of Ten-Tec 
Equipment" <tentec at contesting.com>
Sent: Friday, April 11, 2008 10:49 PM
Subject: Re: [TenTec] Twinlead and Balanced Tuners


> On Fri, 11 Apr 2008 20:01:28 -0500, David W LeJeune, Sr wrote:
>
>>From the balun it goes to a 238 tuner.
>>I've tried several types of balun and finally settled on a choke balun
>>consisting of 21 ft of RG913 wound on a 4 inch PVC pipe.
>>It's head and shoulders better than anything else I used.
>
> You don't agree at all -- what you've described is precisely what I'm
> recommending that you NOT do. :)
>
> 73,
>
> Jim K9YC
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec