[TenTec] Ten Tec 238A settings?

John K Gotwals john at gotwals.com
Mon Apr 14 12:27:59 EDT 2008


For 600 ? ohm line, I use W7FG Ladder Line.
http://www.w7fg.net/

John, N9JG
------------------------------ ORIGINAL MESSAGE

Message: 7
Date: Mon, 14 Apr 2008 08:33:34 -0700
From: "Denton" <denton at oregontrail.net>
Subject: Re: [TenTec] Ten Tec 238A settings?
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Message-ID: <004c01c89e44$e6ad7030$4100a8c0 at D1SFW181>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original

[snip]
Now another thread....I plan on replacing my feeders from the house entrance
with new homebrew feeders, since my existing is several wires spliced
together.....I have on hand no 14 and no 16 copperclad single strand wire
and stranded no 14 450 ohm commercial windowed line.
Current plans are to cut the webbing out of the 450 ohm windowed line and
use either grey small diameter pvc pipe or fiberglass electrical fence posts
for spreaders
The windowed line I can cut and assemble as I raise the antenna's
feedpoint...
Feeders from house entrance to station will remain 450 ohm line...
What are you guys using?
[snip]



More information about the TenTec mailing list