[TenTec] Ten Tec Omni-D Series B Up date

[Mike Hyder -N4NT-]

My Rx: replace the ALC diodes in the rig.  An ALC malfunction causes 
precisely the symptoms you describe.

Mike N4NT

----- Original Message ----- 
From: "Mike" <ka2v at roadrunner.com>
To: <TenTec at contesting.com>
Sent: Friday, April 18, 2008 2:43 PM
Subject: [TenTec] Ten Tec Omni-D Series B Up date


> Update Tnx to the Dr Johnson I set the drive down to the 2
> position,overall output is 80 to 90 watts out on ssb on 75 meters.Radio
> works fine.Swr is now stable,But if I go any higher on the drive it Goes
> up as I talk.
>
> tnx Mike