[TenTec] TenTec Digest, Vol 64, Issue 35

David McClafferty ve1adh at yahoo.ca
Sat Apr 26 17:29:27 EDT 2008


RF transistors have multiple emitters. If one or more (but not all) of these emitters fail the low frequency gain will be reduced.
Dave, VE1ADH


Message: 1
Date: Fri, 25 Apr 2008 11:43:21 -0500
From: "Speer, Doug" <Doug.Speer at FairbanksMorse.com>
Subject: Re: [TenTec] Omni VI TX power low on one band
To: <tentec at contesting.com>
Message-ID:
    <1D095086915A3E4F801FA6C08EBDD9BE015E5D8D at fme0ex02.login2.EnProIndustries.com>
    
Content-Type: text/plain; charset="iso-8859-1"

I posted a similar question a couple of weeks ago.  My Omni VI Plus which I bought from a SK estate had been in storage for many years.  When I bought the rig it seemed to work fine on 40-10m but I was getting low output ~20 watts on 160m and 80m.  I sent it to Ten-Tec and they replaced the finals and drivers at a rather healthy cost.  I got the rig back just this past Monday and now all bands seem to be working per spec.  I asked Ten-Tec for a technical explanation of how final output transistors could work fine on the upper frequency bands but not on the lower frequency bands but never got an explanation other than "the finals were bad".

Your problem may be similar however I would certainly run to ground your LP filter theory before looking at final output transistors.

Doug, W9PN


      __________________________________________________________________
Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now at
http://ca.toolbar.yahoo.com.


More information about the TenTec mailing list